Select a different country or region to see content for your location.
United States
12:50:15 GMT+0000 (Coordinated Universal Time)
QJ1952-N2-MPA
Four-point contact bearing
Four point contact bearing QJ19..-N2-MPA, holding grooves, solid brass cage
Replaces
QJ1952N2MPA
Preferred product
Product information
Main Dimensions & Performance Data
| d | 260 mm | Bore diameter |
| D | 360 mm | Outside diameter |
| B | 46 mm | Width |
| Cr | 370.000 N | Basic dynamic load rating, radial |
| C0r | 640.000 N | Basic static load rating, radial |
| Cur | 19.900 N | Fatigue load limit, radial |
| nG | 3.050 1/min | Limiting speed |
| nϑr | 1.460 1/min | Reference speed |
| ≈m | 15,394 kg | Weight |
Mounting dimensions
| da min | 270 mm | Minimum diameter shaft shoulder |
| Da max | 350 mm | Maximum diameter of housing shoulder |
| ra max | 2,1 mm | Maximum fillet radius |
Dimensions
| rmin | 2,1 mm | Minimum chamfer dimension |
| D1 | 325,8 mm | Shoulder diameter outer ring |
| d1 | 296,05 mm | Shoulder diameter inner ring |
| a | 217,1 mm | Distance between the apexes of the pressure cones |
| an | 11,7 mm | Hight retaining slot |
| bn | 10,5 mm | Width retaining slot |
| rn | 2 mm | Radius retaining slot |
45 ° | Angle retaining slot | |
| α | 35 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 200 °C | Operating temperature max. |
Your current product variant
| Design, bearing outer ring | N2 | Two retaining grooves in the outer ring on one side |
| Cage | Solid brass cage, outer ring guided | Solid brass cage, outer ring guided |
| Tolerance class | PN | Tolerance class PN, acc. to DIN 620 |
| Dimensional / heat stabilization | S1 | Rings dimensional stabilized up to 200° |
| Axial internal clearance | CN | Group N (CN) |
Characteristics
