KWVE30-W
Recirculating ball bearing carriage
Carriages KWVE..-W, wide carriage for linear recirculating ball bearing and guideway assembly
| H | 42 mm | Hauteur du système |
| B | 142 mm | Largeur du chariot |
| L | 97,5 mm | longueur totale du chariot |
| C | 27.500 N | Fra_FRA 1 |
| C0 | 55.000 N | Charge nominale statique 1 |
| M0x | 2.660 Nm | Valeur nominale de moment statique autour de l’axe X |
| M0y | 700 Nm | Valeur nominale de moment statique autour de l’axe Y |
| M0z | 700 Nm | Valeur nominale de moment statique autour de l’axe Z |
| ≈m | 1,95 kg | Weight |
| A1 | 31 mm | |
| JB | 124 mm | |
| b | 80 mm | Largeur du rail |
| A2 | 9 mm | |
| L1 | 72 mm | |
| JL | 52 mm | |
| H1 | 6 mm | |
| H4 | 13,8 mm | |
| H5 | 6 mm | |
| T5 | 12 mm | |
| T6 | 12 mm | |
| G2 | M10 | vis de fixation du dessous (DIN ISO 4762-12.9) |
| G2 MA | 41 Nm | Couple de serrage maximum 2 |
| K3 | M8 | Vis de fixation du dessous (DIN ISO 4762-12.9) |
| K3 MA | 41 Nm | Couple de serrage maximum 2 |
| K6 | M8 | Vis de fixation ci-dessous (DIN 7984-8.8) |
| K6 MA | 12 Nm | Couple de serrage maximum 2 |
| D2 | 8,6 mm | |
| A3 | 11,25 mm | Positionner le connecteur de graissage |
| G3 | M6 | Connecteur de graissage |
| t G3 | 6 mm | Profondeur de vis maximale autorisée pour les connecteurs de graissage |
| VMKB_065 | KWVE | Nom de la matière |
Footnotes
Calculation of basic load ratings in accordance with DIN ISO 14728-1.
Based on practical experience, it may be possible to increase the basic dynamic load rating. The basic load rating can only be transmitted fully if the whole thread length is used and the adjacent construction is dimensioned appropriately.
The stated torques represent maximum values for the secure transmission of forces in vibration-free, quasistatic applications (S0 = 1). We recommend that the tightening torques for the screw connection of the adjacent construction should be determined at the customer under the conditions specific to the application and operation, observing the information in VDI Guideline 2230 Part 1 (2015) and the information in this description.
For location from above:
the maximum screw depth for two central threaded holes is T6 + 3 mm.
| Size code | 30 | |
| Version | Version | |
| Carriage design | W | Chariot large. A combiner avec un rail large |
