KWVE20-W
Chariot à recirculation de billes
Chariot KWVE..-W, chariot de guidage large, à 4 rangées de billes jointives
| H | 27 mm | Height system |
| B | 80 mm | Width carriage |
| L | 69,8 mm | Overall length carriage |
| C | 13.100 N | Dynamic load rating 1 |
| C0 | 27.000 N | Static load rating 1 |
| M0x | 687 Nm | Static moment rating about X axis |
| M0y | 240 Nm | Static moment rating about Y axis |
| M0z | 240 Nm | Static moment rating about Z axis |
| ≈m | 0,5 kg | Poids |
| A1 | 19 mm | Distance from locating edge on carriage to locating edge on guideway |
| JB | 70 mm | |
| b | 42 mm | Width rail |
| A2 | 5 mm | Distance from locating edge to hole |
| L1 | 50,4 mm | |
| JL | 40 mm | |
| H1 | 4,6 mm | Free space, system dimension |
| H4 | 10,6 mm | |
| H5 | 5 mm | |
| T5 | 10 mm | Thread depth |
| T6 | 6 mm | |
| G2 | M6 | Fixing screws above (DIN ISO 4762-12.9) |
| G2 MA | 10 Nm | Maximum tightening torque 2 |
| K3 | M5 | Fixing screws below (DIN ISO 4762-12.9) |
| K3 MA | 10 Nm | Maximum tightening torque 2 |
| K6 | M6 | Fixing screws below (DIN ISO4762-12.9) |
| K6 MA | 17 Nm | Maximum tightening torque 3 |
| D2 | 5,5 mm | |
| A3 | 5 mm | Position lubrication connector |
| G3 | M6 | Lubrication connector |
| t G3 | 5 mm | Maximum permissible screw depth for lubrication connectors |
| VMKB_065 | KWVE | Material name |
Notes de bas de page
Calculation of basic load ratings in accordance with DIN ISO 14728-1.
Based on practical experience, it may be possible to increase the basic dynamic load rating. The basic load rating can only be transmitted fully if the whole thread length is used and the adjacent construction is dimensioned appropriately.
The stated torques represent maximum values for the secure transmission of forces in vibration-free, quasistatic applications (S0 = 1). We recommend that the tightening torques for the screw connection of the adjacent construction should be determined at the customer under the conditions specific to the application and operation, observing the information in VDI Guideline 2230 Part 1 (2015) and the information in this description.
For location from above:
the maximum screw depth for two central threaded holes is T6 + 3 mm.
| Size code | 20 | |
| Version | Version | |
| Carriage design | W | Chariot large. A combiner avec un rail large |
