Sélectionnez un autre pays ou une autre région pour voir le contenu correspondant à votre emplacement.
Etats Unis
09:30:54 GMT+0000 (Coordinated Universal Time)
LTPG15-275-2050-F-0
Table linéaire
Tables linéaires haute précision avec système de guidage monorail et entraînement à vis à billes.Conception en fonte, avec un écrou, sans soufflet.
n.r.
F | Spindle nut design |
dimensions principale & données de performance
| B4 | 275 mm | Total Width |
| H | 75 mm | Total Height |
| L | 275 mm | Length of Carriage |
Cotes de montage
| b82 | 65 mm | |
| b87 | 80 mm | |
| D8 | 9 mm | |
| d85 | 11 mm | |
| d86 | 60 mm | Tolerance -0,01 |
| G43 | M8x16 | Thread |
| G87 | M6 | Thread |
| h85 | 40 mm | |
| h87 | 33 mm | Tolerance ±0,2 |
| jB43 | 140 mm | |
| jL43 | 70 mm | |
| jB44 | 252 mm | |
| jB8 | 160 mm | |
| jB9 | 250 mm | |
| jL44 | 210 mm | |
| jL8 | 60 mm | 1 |
| L85 | 23 mm | |
| L86 | 8 mm | |
| L88 | 42 mm | |
| S8 | 15 mm | |
| T8 | 11 mm | |
| t43 | 16 mm | Depth of Thread |
| t87 | 15 mm | Depth of Thread |
Dimensions
| H1 | 40,5 mm | Height of Carriage |
| H2 | 34 mm | Height of Support Rail |
| H4 | 74,5 mm | Height of Bearing Housing |
| H5 | 74,5 mm | Height of Bearing Housing |
| h82 | 31 mm | |
| L4 | 35 mm | Length of Bearing Housing with Drive System |
| L5 | 25 mm | Length of Bearing Housingwithout Drive System |
Données techniques
| Rx | 198 mm | |
| Ry | 35 mm | |
| Rz | 206 mm | |
| S | 50 mm | Safety Distance |
| mLAW | 13,8 kg | Mass of Carriage |
| vmax | 2,9 m/s | Maximum Speed |
| amax | 20 m/s2 | Maximum Acceleration |
| CI | 19.000 N | Load Direction I: Compressive Load |
| C0 I | 58.000 N | Load Direction I: Compressive Load |
| CII | 19.000 N | Load Direction II: Tensile Load |
| C0 II | 58.000 N | Load Direction II: Tensile Load |
| CIII | 19.000 N | Load Direction III: Lateral Load |
| C0 III | 58.000 N | Load Direction III: Lateral Load |
| M0x per | 5.650 Nm | Max. permissible static moment per Carriage 2 |
| M0y per | 4.100 Nm | Max. permissible static moment per Carriage 2 |
| M0z per | 4.100 Nm | Max. permissible static moment per Carriage 2 |
| d0 | 20 mm | Spindle Diameter |
| P | 50 mm | Spindle Pitch |
| C | 13.000 N | Dynamic load rating 3 |
| C0 | 24.600 N | Basic static load capacity 3 |
| Ca | 17.900 N | Load capacity fixed Spindle bearing dyn |
| C0a | 28.000 N | Load capacity fixed Spindle bearing stat |
information additionnelle
15 Nm | Max. drive torque for the drive spigot | |
2 x KUVE15-B-H | Carriage | |
ZKLF1560.2RS | Rolling Bearings (locating bearing) | |
0,05 mm | Repeat accuracy ± | |
0,85 kg*cm2 | Mass moment of inertia of threaded Spindle |
Plage de température
0 °C | Minimum operating Temperatur | |
80 °C | Maximum operating Temperatur |
Notes de bas de page
1
Location of high precision linear tables: High precision linear tables are supplied as standard with a symmetrical hole pattern. With a symmetrical hole pattern, aL = aR.
2
The values are single loads and apply when the underside of the table is fully supported. These must be reduced for combined loads.
3
Basic load ratings in accordance with DIN 69051. Due to the modified calculation algorithms in DIN 69051, the basic load ratings Ca and C0 may differ in comparison with older data.
Téléchargements :
Votre alternative produit actuelle
| Size code | 15 | |
| Drive System | KGT | Ball screw drive |
| Length of carriage | 275 | 275 mm |
| Spindle diameter | 20 | |
| Spindle pitch | 50 | 50 mm |
| Bellow | 0 | No |
