Technical Information on Yoke type roller bearing track rollers, stud type roller bearing track rollers
Yoke and stud type roller bearing track rollers:
- are ready-to-fit needle or cylindrical roller bearings of single or double row design
- are mounted on shafts or studs (yoke type track rollers) or supplied with a heavy-section roller stud with fixing thread and a mounting aid (stud type track rollers)
- have particularly thick-walled outer rings with a crowned outside surface
- can support high radial loads
- tolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impacts
- are available with or without an inner ring (yoke type track rollers)
- are produced with or without axial guidance of the outer ring (stud type track rollers are always produced with axial guidance)
- are open or sealed on both sides
- are not mounted in a housing bore, but are supported on a flat mating track
- can be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction
|
Double row stud type track roller supported on a flat mating track
|
 |
