Sélectionnez un autre pays ou une autre région pour voir le contenu correspondant à votre emplacement.
Etats Unis
19:02:41 GMT+0000 (Coordinated Universal Time)
KUSE30-HL
Ball monorail guidance system
High, narrow, long carriage for six-row linear recirculating ball bearing and guideway assembly
Cotes de montage
| A1 | 16 mm | |
| JB | 40 mm | |
| b | 28 mm | Width rail |
| Tolb | -0,005 mm | Upper tolerance |
| Tolb | -0,03 mm | Lower tolerance |
| A2 | 10 mm | |
| L1 | 95,3 mm | |
| JL | 60 mm | |
| jL | 80 mm | |
| aL min | 20 mm | 1 |
| aL max | 71 mm | 1 |
| aR min | 20 mm | 1 |
| aR max | 71 mm | 1 |
| H1 | 5,4 mm | |
| H5 | 6 mm | |
| T5 | 11 mm | |
| h | 25 mm | |
| h1 | 12,5 mm | |
| Tol h1 | 0,5 mm | Upper tolerance |
| Tol h1 | -0,5 mm | Distance Distance |
| G2 | M8 | Fixing screws |
| G2 MA | 41 Nm | Maximum tightening torque |
| K1 | M8 | Fixing screws |
| K1 MA | 41 Nm | Tightening torque 2 |
| d1 | 9 mm | |
| N2 max | 4,5 mm | |
| JL5 | 22,65 mm | |
| A3 | 9,5 mm | |
| O | 4,5x1,5 | O-Ring DIN 3771 |
Dimensions principales
| Imax | 5.860 mm | Max length single piece guideway |
| H | 45 mm | Height system |
| B | 60 mm | Width carriage |
| L | 119,3 mm | Overall length carriage 3 |
Données techniques
| I: C | 68.000 N | Load direction I: compressive load 4 |
| I: C0 | 152.000 N | Load direction I: compressive load 4 |
| II: C | 48.000 N | Load direction II: tensile load 4 |
| II: C0 | 85.000 N | Load direction II: tensile load 4 |
| III: C | 50.000 N | Load direction III: lateral load 4 |
| III: C0 | 88.000 N | Load direction III: lateral load 4 |
| M0x | 1.920 Nm | Static moment rating about X axis |
| M0y | 1.540 Nm | Static moment rating about Y axis |
| M0z | 1.360 Nm | Static moment rating about Z axis |
Produits associés
KWSE30-HL | Carriage | |
TKSD30 | Guideway |
Notes de bas de page
1
aL and aR are dependent on the guideway length.
2
The stated torques represent maximum values for the secure transmission of forces in vibration-free, quasistatic applications (S0 = 1). We recommend that the tightening torques for the screw connection of the adjacent construction should be determined at the customer under the conditions specific to the application and operation, observing the information in VDI Guideline 2230 Part 1 (2015) and the information in this description.
3
Minimum covered length for sealing the upper lubrication connectors N2.
4
The basic load rating can only be transmitted fully if the whole thread length is used and the adjacent construction is dimensioned appropriately.
Téléchargements :
Votre alternative produit actuelle
| Size code | 30 | |
| Carriage design | HL | Chariot haut, étroit et long |
Tout
Français
2009-09-21 | Anleitung (Montage, Betrieb) | MON 22 | Französisch