Sélectionnez un autre pays ou une autre région pour voir le contenu correspondant à votre emplacement.
Etats Unis
19:18:27 GMT+0000 (Coordinated Universal Time)
MDKUSE25-365-KGT/40-F-WN2-N
Linear actuator
Actionneurs tandem avec ensemble de rail et de roulement linéaire à recirculation à six rangées, système de guidage monorail et entraînement à vis à billes.Avec deuxième chariot non entraîné, un écrou et fentes de fixation dans le chariot.
dimensions principale & données de performance
| L | 365 mm | Length of Carriage |
| H | 145 mm | Total Height |
| B2 | 260 mm | Total Width |
Cotes de montage
| B1 | 250 mm | Width of Carriage |
| b87 | 90 mm | |
| d85 | 19 mm | |
| Tol d85 | h6 | Tolerance |
| d86 | 75 mm | |
| Tol d86 | h7 | Tolerance |
| G87 | M8 | Thread |
| h13 | 25 mm | |
| h14 | 50 mm | |
| h85 | 75 mm | |
| h87 | 70 mm | |
| JB43 | 35 mm | |
| JB44 | 115 mm | |
| JB45 | 185 mm | |
| jB8 | 50 mm | |
| jB9 | 110 mm | |
| jB10 | 210 mm | |
| L2 max | 5.850 mm | Maximum length of Support Rail |
| L85 | 28 mm | |
| L86 | 9 mm | |
| L88 | 67 mm | |
| NB43 | 14 mm | |
| NB85 | 6 mm | Tolerance P9 |
| NL43 | 20 mm | |
| NL85 | 20 mm | Length of Keyway |
| NT85 | 3,5 mm | Depth of Keyway |
| t87 | 20 mm | Depth of Thread |
Dimensions
| B5 | 259 mm | Width of End Plates |
| FBL | 1,18 | Effective length factor of bellow |
| H1 | 35 mm | Height of Carriage |
| H2 | 108 mm | Width of Support Rail |
| H5 | 144 mm | |
| L4 | 33 mm | |
| L5 | 28 mm | |
| L72 | 2 mm | |
| l41 | 30 mm | |
| l42 | 35 mm | |
| Lx1 min | 20 mm | Minimum distance between the Carriages |
| S41 | 13 mm |
Données techniques
| Rx | 270 mm | |
| Ry | 69,3 mm | |
| Rz | 150 mm | |
| S | 40 mm | Safety Distance |
| mLAW | 12,84 kg | Mass of Carriage |
| m3 | 11,28 kg | Mass of additional Carriage |
| vmax | 1,73 m/s | Maximum Speed |
| amax | 20 m/s2 | Maximum Acceleration |
| IC | 100.200 N | Load direction I: compressive load |
| I C0 | 324.000 N | Load direction I: compressive load |
| II C | 68.600 N | Load direction II: tensile load |
| II C0 | 180.000 N | Load direction II: tensile load |
| III C | 73.800 N | Load direction III: lateral load |
| III C0 | 188.000 N | Load direction III: lateral load |
| M0x per | 13.500 Nm | Max. permissible static moment per Carriage 1 |
| M0y per | 16.200 Nm | Max. permissible static moment per Carriage 1 |
| M0z per | 15.500 Nm | Max. permissible static moment per Carriage 1 |
| ly | 7.069 cm4 | Geometrical moments of inertia of Support Rail |
| lz | 899 cm4 | Geometrical moments of inertia of Support Rail |
| Ca MU | 14.900 N | Load capacity spindle nut dyn 2 |
| C0a MU | 32.400 N | Load capacity spindle nut stat 2 |
| Ca L | 27.500 N | Load capacity fixed Spindle bearing dyn |
| C0a L | 55.000 N | Load capacity fixed Spindle bearing stat |
| d0 | 32 mm | Spindle Diameter |
| P | 40 mm | Spindle Pitch |
| ls | 6,43 kg*cm2 | Mass moment of inertia of threaded Spindle |
| WN2 | ja | Second, non-driven Carriage |
information additionnelle
ZKLF2575-2RS-PE | Rolling Bearings | |
F | Drive System | |
4x KWSE25-H | Carriage |
Notes de bas de page
1
2
Basic load ratings in accordance with DIN 69051. Due to the modified calculation algorithms in DIN 69051, the basic load ratings Ca and C0 may differ in comparison with older data.
Téléchargements :
Votre alternative produit actuelle
| Size code | 25 | |
| Length of carriage | 365 | 365 mm |
| Drive type | KGT | Ball screw drive |
| Spindle pitch | 40 | 40 mm |
| Spindle nut design | F | Flange nut |
| Additional carriage | WN2 | Second, non-driven carriage |
| Spindle support | / | None |
| Attachment to the carriage | N | T-Slots |
Nous sommes désolés...
Aucun fichier CAO n’est actuellement disponible pour ce produit. Si vous souhaitez être informé de la disponibilité des fichiers CAO, connectez-vous ou inscrivez-vous gratuitement.
Produits récemment consultés
Wait to see recently viewed products