Sélectionnez un autre pays ou une autre région pour voir le contenu correspondant à votre emplacement.
Etats Unis
02:07:24 GMT+0000 (Coordinated Universal Time)
MKUVE20-250-C-LN-ZR-W2-N-FA517.2
Linear actuator
Actuators with four-row linear recirculating ball bearing and guideway assembly, monorail guidance system and toothed belt drive. Low Noise design with support rail in three segments and second, driven carriage
n.r.
FA517.2 | Support Rail Design |
Main Dimensions & Performance Data
| B2 | 88 mm | Total Width |
| H | 110 mm | Total Height |
| L | 250 mm | Length of Carriage |
Mounting dimensions
| B1 | 86 mm | Width of Carriage |
| D86 | 68 mm | |
| Tol D86 | G7 | Tolerance |
| D87 | 110 mm | |
| d85 | 20 mm | Tolerance h7 |
| d86 | 61 mm | |
| G87 | M6 | |
| h13 | 20 mm | |
| h14 | 60 mm | |
| h18 | 10 mm | |
| JB43 | 40 mm | |
| jB8 | 40 mm | |
| L2 max | 24.000 mm | Maximum length of Support Rail |
| L88 | 31 mm | |
| NB85 | 6 mm | Tolerance P9 |
| NL85 | 25 mm | Length of Keyway |
| NT85 | 3,5 mm | Depth of Keyway |
| S41 | 10 mm | |
| t87 max | 24 mm | Depth of Thread |
Dimensions
| B18 | 15 mm | |
| H1 | 19 mm | Height of Carriage |
| H2 | 90 mm | Height of Support Rail |
| H4 | 101,4 mm | Height of Return Unit |
| H18 | 60 mm | |
| h85 | 53,4 mm | |
| L1 | 260 mm | |
| L4 | 97 mm | Length of Return Unit |
| L6 | 6 mm | Length of Wiper Brushes |
| L18 | 400 mm | |
| l41 | 59,5 mm | |
| l42 | 36 mm | |
| Lx1 min | 50 mm | |
| B4 | 89 mm | Width of Return Unit |
| T86 | 2,3 mm | Depth Fit |
| Tol T86 | 0 mm | Lower tolerance |
| Tol T86 | 0,3 mm | Upper Tolerance |
Technical data
| Rx | 95 mm | |
| Ry | 63 mm | |
| S | 85 mm | Safety Distance |
| mLAW | 2,5 kg | |
| m3 | 2,5 kg | Mass of additional Carriage |
| vmax | 5 m/s | Maximum Speed |
| amax | 30 m/s2 | Maximum Acceleration |
| I C | 21.300 N | Load direction I: compressive load |
| I C0 | 54.000 N | Load direction I: compressive load |
| II C | 21.300 N | Load direction II: tensile load |
| II C0 | 54.000 N | Load direction II: tensile load |
| III C | 21.300 N | Load direction III: lateral load |
| III C0 | 54.000 N | Load direction III: lateral load |
| M0x per | 664 Nm | Max. permissible static moment per Carriage 1 |
| M0y per | 1.150 Nm | Max. permissible static moment per Carriage 1 |
| M0z per | 1.400 Nm | Max. permissible static moment per Carriage 1 |
| Iy | 300 cm4 | Geometrical moments of inertia of Support Rail |
| lz | 198 cm4 | Geometrical moments of inertia of Support Rail |
Additional information
68,8 Nm | Max. permissible drive torque | |
2xKWVE20-B-SN | Carriage | |
0,1 mm | Repeat Accurancy ± | |
200 mm | Feed (mm/rotation) | |
50BATK10 | Toothed Belt | |
0,29 kg/m | Mass of Toothed Belt | |
1.880 N | Permissible Toothed Belt operating force | |
5 kg*cm2 | Mass moment of inertia of Gears |
Temperature range
| max | 80 °C | Maximum operating Temperatur |
| min | 0 °C | Minimum operating Temperatur |
Notes de bas de page
1
The values are single loads and apply when the underside of the actuator is fully supported. If there are several carriage units per actuator or combined loads are present, these must be reduced.
Téléchargements :
Votre alternative produit actuelle
| Size code | 20 | |
| Length of carriage | 250 | 250 mm |
| Design | LN | Low-Noise |
| Drive type | (3)ZR | Toothed belt drive |
| Additional carriage | W2 | Second, driven carriage |
| Attachment to the carriage | N | T-Slots |
